LOCTITE PC9313

Harmonization Code : 3824.99.92.97 | Prepared binders for foundry molds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: other : other : other

LOCTITE PC9313

Main features

  • Minimum 6 mm Wear Build-Up
  • 30-Minute Working Life
  • 83 N/mm^2 Compressive Strength

Product Description

LOCTITE PC 9313 is a two-part, ceramic-filled non-sag epoxy paste for rebuilding and protecting high-wear processing equipment. Resin and hardener mix at 2:1 by either volume or weight. Working life is 30 minutes at 23 deg C, and full cure time is 6 hours at 25 deg C. The material is applied at 10 to 40 deg C and built to a minimum 6 mm thickness. After one week of cure at 25 deg C, compressive strength is 83 N/mm^2 and Shore D hardness is 85. Typical dry service temperature is -29 to 121 deg C.

Key features

  • Minimum 6 mm Wear Build-Up: Ceramic-filled paste can be built to a minimum 6 mm thickness on overhead and vertical wear surfaces.
  • 30-Minute Working Life: Working life is 30 minutes at 23 deg C, with full cure in 6 hours at 25 deg C.
  • 83 N/mm^2 Compressive Strength: Compressive strength is 83 N/mm^2 after one week of cure at 25 deg C by ASTM D695.

Applications

Dredge-pump liners, flumes, troughs, vibrating feeders, chutes, hoppers, and other processing equipment exposed to abrasion and impact.

Product Family

LOCTITE PC9313

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Grey paste
Chemistry Type
Epoxy
Work life @25°C
Work life is the amount of time we have to work with a material until it is no longer able to be easily worked and applied on a substrate. It is based on the change in viscosity and it can rely on the application requirements.
0.5 hours

Additional Information

Technical properties

As supplied

PropertyValueUnitMethod / condition
Mix ratio by volume2:1Resin:hardener
Mix ratio by weight2:1Resin:hardener
Application temperature10 to 40deg CDuring application
Working life30min23 deg C
Minimum applied thickness6mmBuild-up application
Technical properties

Cured material

PropertyValueUnitMethod / condition
Compressive strength83N/mm^2ASTM D695, cured 1 week at 25 deg C
Shore hardness85Shore DASTM D2240, cured 1 week at 25 deg C
Typical dry service temperature-29 to 121deg CCured coating

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers