Name: LOCTITE EDAG 6017SS
Brand: Henkel Corporation
SKU: LOCTITE EDAG 6017SS

Main features

Flexible Screen-Printed Conductive Features
Low-Temperature Heat-Dry Processing
Resistors, Heaters, Sensors and ESD

Product Description

LOCTITE EDAG 6017SS E&C is a one-component, screen-printable conductive carbon ink for printed electronic features on flexible and paper-based substrates. The black thermoplastic ink contains 27 wt% solids, has a typical viscosity of 22,000 mPa s at 25 deg C, and uses a recommended drying cycle of 15 minutes at 120 deg C. After drying, it has a typical sheet resistance of 35 ohm/sq at 25 um dry coating thickness and ASTM D3359 adhesion grade 5B on PET. The ink is used for printed resistors, heating elements, sensing devices, and ESD features on PET, PEN, PI, and paper.

Key features

Flexible-Substrate Screen Printing: One-component thermoplastic carbon ink prints on PET, PEN, PI, and paper.
Heat-Drying Cycle: Recommended drying is 15 minutes at 120 deg C.
Dried Sheet Resistance: Typical sheet resistance is 35 ohm/sq at 25 um dry coating thickness after drying for 15 minutes at 120 deg C.

Applications

Printed resistors, heating elements, sensing devices, and ESD features on PET, PEN, PI, paper, and related supported substrates.

TDS, SDS & Technical Documents

Technical Specifications

General Properties

Appearance

Black

Density (g)

1.10 g/cm3

Solids

27 %

Thermal Properties

Flash Point

78 °C

Operating Temperature

Max. 100 °C

Physical Properties

Viscosity

22,000 mPa.s

Additional Information

Technical properties

As-supplied / before-processing properties

Property	Value	Unit	Method / condition
Solid content	27	wt%	Typical; undried material
Viscosity	22,000	mPa s	Typical; Brookfield RVT, 25 deg C, after 1 minute, 20 rpm
Density	1.10	g/cm^3	Typical; undried material
Shelf life	1	year	Typical; 5 to 30 deg C, from date of manufacture
Coverage	12	m^2/kg	Typical wet product; 10 um dry coating thickness