HUMISEAL 2E27
Harmonization Code : 8473.30.80.00 | Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 8470 to 8472 ; Parts and accessories of the machines of heading 8471 ; Other; Other
Main features
- Fast 15-Minute Pot Life
- Simple 1:1 System Mixing
- Clear PCB Component Encapsulation
Product Description
HumiSeal 2E27 provides a clear two-component epoxy system with a simple 1:1 mix ratio for full PCB potting or localized component encapsulation. Typical Part A and Part B viscosities are 5,000 and 6,000 cP, respectively. For a typical 100 g mixed volume, pot life is 15 minutes and handling time is 60 minutes. The cured encapsulant has Shore D60 hardness and a typical operating-temperature range of -60 to 135 deg C. Applications extend from individual PCB component protection to electronic and industrial sealing and encapsulation.
Key features
- PCB component protection: The epoxy is used for full potting and individual PCB component encapsulation.
- Simple 1:1 mixing: Part A and Part B combine at a simple 1:1 ratio.
- 60-minute handling: Typical handling time is 60 minutes after mixing at a 100 g volume.
Applications
PCB component protection, full potting, individual component encapsulation, and electronic or industrial sealing and encapsulation.
Technical Specifications
General Properties
Thermal Properties
Additional Information
As-supplied / before-processing properties
Values are typical product-selection data and are not specifications. Pot-life and handling-time values use a typical 100 g volume.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Viscosity | 5,000 | cP | Part A; typical |
| Viscosity | 6,000 | cP | Part B; typical |
| Mix ratio | 1:1 | Part A:Part B; basis not stated | |
| Pot life | 15 | min | Typical 100 g mixed volume |
| Handling time | 60 | min | Typical 100 g mixed volume |
After-processing / final-state properties
Final-state values describe material after the typical 24 h room-temperature or 30 min at 65 deg C full cure. Cure time may vary with volume or mix ratio. Values are not specifications.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Color | Clear | Cured material | |
| Hardness | D60 | Shore D | Cured material; typical |
| Operating temperature | -60 to 135 | deg C | Cured material; typical range |
